Weathercloud 11 Now Available – Weathercloud Blog (2024)

1. Max Müller says:

   March 1, 2023 at 11:37 am

   Congratulations to this very fine work
   I will wish you much success
   All the best

   Reply

   • Weathercloud says:

     March 1, 2023 at 11:53 am

     Thank you for your good wishes Max :)

     Reply

2. Fred C says:

   March 24, 2023 at 7:43 pm

   I access weathercloud mostly through my computer browser. I assume I am getting the latest software version. One problem I have had is that the Evolution graphs show incorrect time window. If I am viewing at 11am, I am seeing a graph ending at 18:00 (6pm). I have checked that my preferences are set correctly for my time zone. What can I do?

   Reply

   • Weathercloud says:

     March 27, 2023 at 1:30 pm

     Hi Fred, please make sure you have set the correct time zone for both your user account and your device. You can set the time zone of your user account from the Preferences page, and the time zone of your device by going to the Devices page and clicking on Edit device in the Settings drop-down menu.

     Reply

3. Christian GUIDU says:

   March 31, 2023 at 12:27 am

   Good morning
   how can I enter my weathercloud account to change the characteristics of my weather device

   Reply

   • Weathercloud says:

     March 31, 2023 at 8:50 am

     Hi Christian, you can sign in to your Weathercloud account from the Sign in page. Once logged in, you can edit your device by going to the Devices page and clicking on Edit device in the Settings drop-down menu.

     Reply

     See Also

     Weathercloud- Update: alles neu macht der MaerzDas Wetter-Netzwerk WeatherCloud - Wetter-Center.de

4. Aljaz says:

   April 15, 2023 at 7:43 pm

   Hello.
   I would like to have the option to set notification via e-mail if my weather station stops sending data to your server. The time after you get notification should be customizable (e.g. after 1, 2, 3 …. hours of no data).
   The other request I have is to be able to set regional time and date format on the start page. Currently it is only possible to set units.
   Thanks and keep up the good work! :)
   Aljaz, Slovenia

   Reply

   • Weathercloud says:

     April 17, 2023 at 10:40 am

     Hi Aljaz, you can set the units of measure and enable the device status emails at any time from the Preferences page. You can check out our FAQ page for more information about the status notifications: What states can a device be on?

     Reply

     • Alejandro S. says:

       October 8, 2023 at 11:00 am

       Dear Weathercloud team!

       First of all, thank you for steady development of the project! And a couple of comments.

       (1) I would echo the above suggestion to have possibility to select date and time format in profile settings. Now it is linked to a selected language but often it is not convenient to have mm.dd.yyyy instead of dd.mm.yyyy etc.

       (2) I would encourage you to think about android app, which not only will move the project to the next level, but will allow to use widgets which would show real-time info of the selected weather station in beautiful and brief way on mobile desktop.

       (3) I would also propose to consider using Telegram bots for notifications (instead of or in addition to emails). Such notifications are being used, for example, by router manufacturers for a while, and it makes sense.

       Thanks and BR,
       Alejandro S.

       Reply

       • Weathercloud says:

         November 13, 2023 at 9:39 am

         Hi Alejandro, thank you for sharing your suggestions. We are actively working on allowing independent selection of date and time formats from the language. Also, we are in the process of developing the app for mobile devices. Your feedback on Telegram notifications is duly noted and will be taken into consideration. We appreciate your input.

         Reply

5. Alberto Dalla Pellegrina says:

   May 2, 2023 at 11:11 am

   Ciao. Ho combinato qualcosa che non dovevo fare. Sono in OFF LINE e non riesco ad attivare la funzione di riattivazione . Grazie e complimenti…

   Reply

   • Weathercloud says:

     May 2, 2023 at 11:39 am

     Ciao Alberto, ti chiediamo gentilmente di contattare il nostro team di supporto facendo clic qui in modo che possano aiutarti a riconnettere il tuo dispositivo.

     Reply

     • Dalla Pellegrina Alberto says:

       May 2, 2023 at 11:27 pm

       Grazie molto gentili lo farò domani in mattinata

       Reply

6. Scott says:

   May 8, 2023 at 1:28 am

   I haven’t done this in a while so maybe I’m forgetting something, but I can’t follow any more stations. I deleted a couple of inactive ones but the “star” button to follow a particular station is grayed out and unresponsive. I used to be able to do this without issue.

   Reply

   • Weathercloud says:

     May 8, 2023 at 1:36 pm

     Hi Scott, we have checked and it is a bug, which will be fixed shortly. Sorry for the inconvenience.

     Reply

     • Scott says:

       May 13, 2023 at 10:47 pm

       Thanks for getting on this so quick, and I’m glad to know I’m not completely crazy.

       Reply

       • Weathercloud says:

         May 15, 2023 at 11:20 am

         We are happy to confirm that the issue has already been solved.

         Reply

7. Jeffrey says:

   May 11, 2023 at 2:11 pm

   Can I get a promotion code

   Reply

   • Weathercloud says:

     May 11, 2023 at 4:27 pm

     Hi Jeffrey, we give promo codes on special occasions such as the World Meteorological Day or the Cyber Monday.

     Reply

8. Wiggers says:

   May 22, 2023 at 9:23 am

   I have a bookmark for my own weather station, but if I use this on my phone when I am away from home, I get the current location, not my station.

   Reply

   • Weathercloud says:

     June 1, 2023 at 10:21 am

     Hi Wiggers, we recommend bookmarking your device page instead of the Home page, as it remains unaffected by your location.

     Reply

9. Stephane Meric says:

   June 1, 2023 at 10:10 am

   I would like to know if the data which are recorded each 10-minutes time interval, correspond to integrated data over a limited period of time. In that case, what is the sampling period for the data used for integrating the final result (after 10 minutes). I would like to add that I’m registered under a basic account mode.
   Thanks for your reply.

   Reply

   • Weathercloud says:

     June 1, 2023 at 11:35 am

     Hi Stephane, the upload interval is 10 minutes for the Basic plan, and 1 minute for the Pro and Premium plan. You can check out our Plans page for more details. Thank you.

     Reply

10. Stephane MERIC says:

    June 1, 2023 at 10:47 am

    hi again,
    I have just realized that the latitude position value of my device (IETR2_SKYWATCHBL1000) is not noticed in the csv file at the 31st may date. Do you have any explanation?
    Thanks again.

    Reply

    • Weathercloud says:

      June 1, 2023 at 11:30 am

      Hi Stephane, please note that the exported CSV files do not include the latitude and longitude of the device.

      Reply

11. Clayton says:

    October 30, 2023 at 4:22 am

    Is there an API for downloading data from my weather station? I would like to, say at the end of each month, have a raspberry pi download my data for the month.

    Reply

    • Weathercloud says:

      November 13, 2023 at 9:26 am

      Hi Clayton, we currently do not have an API for data retrieval. However, you can conveniently export monthly data to CSV format directly from the Database page.

      Reply

12. Paul Donald says:

    November 14, 2023 at 2:37 pm

    Hi I’m very new to Weathercloud (joined today!), so sorry if this is a stupid question. When I download data in CSV format, I only seem to get data up as far as “Atmospheric pressure (hPa)”, and everything from “Rain (mm)” to “UV index” is blank. Any ideas why please? Thanks!

    Reply

    • Weathercloud says:

      November 14, 2023 at 6:13 pm

      Hi Paul, thank you very much for joining Weathercloud. Upon reviewing, we have confirmed that your exported CSV file contains data for all the weather variables recorded by your device. It seems that you may have already resolved the issue. If you have any further questions or need assistance, please let us know.

      Reply

      • Paul Donald says:

        November 14, 2023 at 7:13 pm

        Thanks! Yes, I’m now getting all the data. I think it is because I had registered my unit as a 5-in-1, not a 7-in-1. Great site and support! Thanks again. Paul

        Reply

        • Weathercloud says:

          November 15, 2023 at 1:12 pm

          We appreciate your confirmation and are glad to learn that you successfully resolved the issue.

          Reply

13. Richard Mallard says:

    April 18, 2024 at 10:43 am

    Problem with Wind Direction data download

    I download data from my Bresser 5 in1 station “Raven” to Excel regularly. Situated in Altrincham, Cheshire at coordinates 53° 21′ 54″ N 2° 18′ 37″ W.

    From 17th April the wind direction is reported on most days in the csv download as “calm”, the windspeed is reporting correctly and certainly isn’t calm!

    Wind direction data from previous months which was reported correctly in the past is now, on most days, reported as “calm”.
    Is this a bug in Weathercloud software or a fault in my station? Batteries were changed three months ago. Using Chrome and Vivaldi browsers to access, same problem with both.

    Many thanks

    Reply

    • Weathercloud says:

      April 18, 2024 at 11:37 am

      Hi Richard, following yesterday’s site update, we’ve made some adjustmets to how wind speed is displayed in the reports. Now, when the wind speed is 0, the wind direction is indicated as Calm. If calm conditions prevail, Calm will replace the wind sector. However, please note that the exported CSV file still includes the raw data for wind direction. If you need any further clarification, please do not hesitate to let us know.

      Reply

14. Richard Mallard says:

    April 18, 2024 at 8:17 pm

    Thats not right? Sample data below for 1- 5 April

    NEW Wind OLD Wind direction

    Mon 1CalmENE
    Tue 2CalmENE
    Wed 3CalmWSW
    Thu 4CalmSSE
    Fri 5W W

    The wind speed and wind gusts are unchanged between the two exports.

    The exported csv does NOT contain the raw wind direction.

    Reply

    • Weathercloud says:

      April 19, 2024 at 10:02 am

      Following our recent update, Calm now replaces the wind sector (e.g. ENE) in the daily, monthly and annual reports if wind speed has been 0 for most of the time. There have been no changes to how data is displayed in the exported CSV files, which contain the raw data sent by the device.

      Reply

15. Richard Mallard says:

    April 22, 2024 at 10:37 am

    Disappointing change. My historical records now can’t be compared with current.

    Shame you didn’t consult with users first before changing your site coding

    Will get data from https://meteostat.net/en/station/03334?t=2024-04-08/2024-04-15 instead

    Reply

    • Weathercloud says:

      April 22, 2024 at 1:11 pm

      The adjustment to how wind direction is presented in the reports was proposed by users. There have been no changes made to the historical records stored in the database.

      Reply

16. Bruce Noel Bevan says:

    April 23, 2024 at 5:07 am

    dose weathercloud work in Australia

    Reply

    • Weathercloud says:

      April 23, 2024 at 9:57 am

      Hi Bruce, we confirm that Weathercloud is available in all countries.

      Reply

Leave a Reply